PRACTICAL INFORMATION
CITROËN will not accept respon-
sibility for the cost incurred in
repairing your vehicle or for recti-
fying malfunctions resulting from
the installation of accessories not
supplied and not recommended
by CITROËN and not installed in
accordance with its instructions,
in particular when the combined
consumption of all of the addition-
al equipment connected exceeds
10 milliamperes.
Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard
or optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a CITROËN dealer.
Procedure for replacing a faulty fuse
with a new fuse to rectify a failure of the
corresponding function.
Access to tools
The extraction pliers and the spare
fuse storage compartment are installed
on the back of the dashboard fusebox
cover.
For access to them:
unclip the cover by pulling on the
side,
remove the cover completely,
remove the pliers.
Changing a fuse
Before changing a fuse, the cause of
the failure must be identifi ed and recti-
fi ed.
Identify the faulty fuse by checking
the condition of its fi lament.
Use the special pliers to extract the
fuse from its housing.
Always replace the faulty fuse with a
fuse of the same rating.
Check the correspondence between
the number etched on the box, the
rating etched on the fuse and the
tables below.
Correct Incorrect
To Next Page
Loading...
