199
Practical information
Checking tyre pressures/inflating accessories
You can also use the compressor, without
injecting any product, to:
- check or adjust the pressure of your tyres,
- inflate other accessories (balls, bicycle
tyres...).
) Connect the compressor's electrical
connector to the vehicle's 12 V socket.
) Start the vehicle and let the engine run.
) Adjust the pressure using the compressor
(to inflate: switch B in position "I" ; to
deflate: switch B in position "O" and press
button C ), according to the vehicle's tyre
pressure label or the accessory's pressure
label.
) Remove the kit then stow it.
) Turn the selector A to the "Air"
position.
) Uncoil the black pipe H fully.
) Connect the black pipe to the
valve of the wheel or accessory.
If necessary, fit one of the adaptors
supplied with the kit first.
To Next Page
Loading...
