47
Monitoring
Monochrome screen C
Information displays
) Press the button, located at the end of
the wiper stalk , to display the various trip
computer tabs in succession.
- the current information tab
with:
● the range,
● the current fuel
consumption,
● the distance remaining
to be travelled or the
Stop & Start time counter.
- the trip "1" tab with:
● the distance travelled,
● the average fuel
consumption,
● the average speed,
for the first trip.
- the trip "2" tab with:
● the distance travelled,
● the average fuel
consumption,
● the average speed,
for the second trip.
) Pressing the button again returns you to
the normal display.
16/9 colour screen (MyWay)
Trip zero reset
) When the trip required is displayed, press
the button on the end of the wiper stalk for
more than two seconds.
Trips "1" and "2" are independent but their use
is identical.
For example, trip "1" can be used for daily
figures, and trip "2" for monthly figures.
To Next Page
Loading...
