Rear seats
Bench seat with fixed one-piece cushion and split backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot.
) Move the corresponding front seat forward
if necessary.
) Check that the seat belt is positioned
correctly on the side of the seat back.
) Place the head restraints in
the low position.
Folding the backrest
) Pull control 1 forwards to release the seat
back 2 .
) Fold the seat back 2 on to the cushion.
When repositioning the rear seat backrest:
) Straighten the seat back 2 and secure it.
) Check that the red indicator, located next to
the control 1 , is no longer visible.
Repositioning the seat backrest
When repositioning the seat backrest,
take care not to trap the seat belts.
To Next Page
Loading...
