19
2
Access
Check before setting off
To ensure that the panels are retained correctly
while driving, check that each panel is properly
positioned and secured.
Front windows
Slacken the two screws (1) on the interior side
of the door, then remove the released window
by pulling it up (2).
Carry out the operation in reverse order to refit
the window.
On the Hard Top variant, the opening of the
windows can be adjusted. You can select
5
positions.
Rear quarter panels
Removing
Remove the screws (1) at the bottom part on
the interior side, then remove the released
quarter panel by pulling it up (2).
https://www.automotive-manuals.net/
To Next Page
Loading...
