54
Driving
Drive selector
(1) Drive selector.
Selector modes
(N) "NEUTRAL" position: no drive engaged.
(D) "DRIVE" position: forward.
(R) "REVERSE" position: reverse.
It is essential to keep the brake pedal applied
when changing selector position.
Do not press the accelerator pedal when
moving the selector lever from position "N"
to position "D" or "R".
All changes of drive selector position must
be made with the vehicle stationary.
Failure to follow this advice leads to the
risk of an accident.
Do not change drive direction with the
selector when the accelerator pedal is
pressed down.
This can cause the vehicle to move off
suddenly and cause an accident.
Electric power steering
system
If this warning lamp is visible on
your E-MEHARI's instrument
panel: your E-MEHARI's power
steering has a
technical problem.
If this happens, you must contact
CITROËN ASSISTANCE as soon as
possible.
It is recommended that the vehicle not be
used while this warning lamp is on: you
could lose control of your vehicle, cause
an accident and be injured.
The electric power steering system is designed
to provide power assistance to the steering
when parking or driving at low speed so that
you can manoeuvre the vehicle with less effort.
When driving in town, the level of electric
assistance can be increased by using the City
function.
To activate the City function, press the control
button.
With the City function activated, the
CITY indicator lamp comes on in the
instrument panel of your E-MEHARI.
To deactivate the City function: press the
control button again. The green "City" indicator
lamp goes off.
The City function is switched off automatically
when the ignition is switched off.
https://www.automotive-manuals.net/
To Next Page
Loading...
