58
Practical information
Charging your E-MEHARI
General information
Your E-MEHARI is an electric vehicle that
uses electric current at high voltage.
Failing to observe the correct handling
instructions can cause serious or fatal
injuries.
Ensure that you read and follow the
charging procedures recommended by
CITROËN.
To charge your E-MEHARI, you must use one
of the following:
-
A charging cable including a CCID unit
with a
domestic 230 V socket and a Type
2
connector.
-
A wall box or a compatible public charging
point together with a
charging cable with
a
Type 2 connector.
Never use an extension lead.
1. Type 2
charging nozzle.
Charging the LMP
®
battery tted
to your E-MEHARI
In order to offer its optimum range,
your E-MEHARI's LMP
®
battery must
be charged whenever possible,
particularly during periods when it is
parked for several hours.
A battery charged to 100% cannot
remain parked for more than 48
hours
without being recharged.
To preserve the long service life of the
LMP
®
battery, it must be charged to 100%
at least once a month.
Charging socket panel (access
to the charging socket)
The charging socket panel (1) on your
E-MEHARI cannot be locked.
Opening the charging socket panel gives
access to the socket for charging your
E-MEHARI.
Your E-MEHARI uses a
Type 2 connector
which allows charging from your domestic
power supply, from a wall box installed at your
home, or at a
public charging point compatible
with this type of socket.
https://www.automotive-manuals.net/
To Next Page
Loading...
