72
Technical data
Identication markings/
VIN
The VIN of a vehicle is a code that allows each
vehicle to be identified (Vehicle Identification
Number).
The VIN can be found in two places on your
E-MEHARI:
-
The upper front crossmember
-
The rear crossmember
Technical characteristics –
Electric motor/LMP
®
battery/On-board charger
Motor characteristics
Characteristics of the motor in your
E-MEHARI
Type of motor Permanent magnet
Maximum power 50 kW
Nominal power 35 kW
The LMP
®
battery
This LMP
®
battery stores, for an equivalent
weight, five times more energy than
a traditional battery, and can be recharged in
a
few hours.
The vehicle's range has been type-approved to
European Regulation ECE 101R01.
The LMP
®
battery is made only of non-polluting
materials.
At the end of its life, the LMP
®
battery will be
collected and all of its components will be
recycled or reused.
Battery characteristics
(general, thermal and
electric)
General characteristics
Volume (L) 300
Weight (kg) 300
Thermal characteristics
Internal temperature 60°C/80°C
Operating
temperature
-20°C/+60°C
https://www.automotive-manuals.net/