PRACTICAL INFORMATION
Remove the compressor and
store the bottle in the plastic bag,
supplied in the kit, to avoid staining
your vehicle with traces of fl uid.
Drive immediately for approxi-
mately two miles (three kilome-
tres), at reduced speed (between
15 and 35 mph [20 and 60 km/h]),
to plug the puncture.
Stop to check the repair and the
pressure.
Connect the compressor pipe di-
rectly to the valve of the repaired
wheel.
Switch on the compressor by
moving the switch A to posi-
tion "1" until the tyre pressure
reaches 2.0 bars.
If this pressure has not been
reached after approximately three
minutes, the tyre cannot be re-
paired; contact a CITROËN dealer
to have your vehicle repaired.
To Next Page
Loading...
