PRACTICAL INFORMATION
Main beam headlamps
S i d e l a m p s
Remove the rubber cover.
Detach the clips by lowering
them on each side of the bulb.
Pull on the bulb-holder to remove it.
Replace the faulty bulb.
Push the bulb-holder back into
its housing.
Reattach the clips.
Refi t the rubber cover.
Rotate the bulb-holder a quarter
turn anti-clockwise.
Remove it from its housing.
Replace the faulty bulb.
Reposition the bulb-holder.
Rotate it a quarter turn clockwise
to reposition in its housing.
Direction indicators
The direction indicator bulb is located
underneath the main beam bulb.
Remove the rubber cover.
Pull on the bulb-holder to remove it.
Replace the faulty bulb.
Reposition the bulb-holder in the
bracket and push it in.
Refi t the rubber cover.
To Next Page
Loading...
