PRACTICAL INFORMATION
Integrated direction indicator
side repeaters
To change the repeater, press down-
wards fi rmly on the zone indicated
by the arrow, then pull the repeater.
Repeaters can be obtained from a
CITROËN dealer.
Model with Xenon headlamps
and directional headlamps
1. Dual-function Xenon head-
lamps (dipped/main beam)
2. Additional main beams
(H7- 55 W )
3. Sidelamps (H6 W- 6 W )
(see previous page)
4. Direction indicators
(H21- 21 W )
(see previous page)
Dual-function Xenon headlamps
(dipped/main beam)
Additional main beams
Remove the rubber cover.
Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.
Replace the faulty bulb.
Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.
Refi t the rubber cover.
If the headlamp bears this
symbol, any operation to
change the Xenon dual-
function directional head-
lamp (D1S-35 W) must be carried
out by professionals (risk of elec-
trocution).
Consult a CITROËN dealer.
It is recommended to change both
bulbs at the same time if one of
them is faulty.
When using a high-pres-
sure washer on persistent
marks, do not direct the jet
at the lamps or their edges for too
long, so as to avoid damaging their
protective coating and seals.
To Next Page
Loading...
