XI
190
PRACTICAL INFORMATION
CHANGING A BULB
The headlamps are fi tted
with polycarbonate glass
with a protective coating:
) do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
) use a sponge and soapy water,
) when using a high pressure
washer on persistent marks, do
not keep the lance directed to-
wards the lamps or their edges
for too long, so as not to dam-
age their protective coating and
seals.
) Do not touch the bulb directly
with your fi ngers, use lint-free
cloths.
Changing a bulb should only be
done after the headlamp has been
switched off for a few minutes (risk
of serious burns).
It is imperative to use only anti-ul-
traviolet (UV) type bulbs in order
not to damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specifi cation.
Front lamps
1. Dipped beam headlamps
(H7-55 W)
2. Main beam headlamps
(H1-55 W)
3. Sidelamps (H6W-6 W )
Daytime running lamps/
sidelamps (LEDs)
4. Direction indicators
(H21-21 W)
Model with halogen headlamps Model with Xenon headlamps
and directional headlamps
1. Dual-function Xenon
headlamps (dipped/main
beam)
2. Additional main beams
(H7-55W)
3. Sidelamps (H6W-6W)
Daytime running lamps/
sidelamps (LEDs )
4. Direction indicators (H21-21W)
To Next Page
Loading...
