2
AX2000G
Actuator
Model no.
Size
(max. torque)
A
Driver type
B
Cable change
Note 2
D
Mounting base
Note 3, Note 4
C
Driver type
Power voltage
Note 1
E
CE marking
F
Dowel hole
Note 4, Note 5
G
Body surface treatment
Note 3
H
How to order
AX2
A
Size (max. torque)
Symbol
Descriptions
006
012
018
6 N·m
12 N·m
18 N·m
B
Driver type
GS GS type driver
C
Mounting base
(cannot be used with dowel holes P2 and P3)
Blank
B
BS
Standard (without mounting base)
With blackening mounting base
Electroless nickel plating surface treatment mounting base
Use body surface treatment S together.
D
Cable change
Blank
D**
DM**
Standard (cable length 4 m)
Cable length change
Flexible cable length change
G
Dowel hole
Blank
P1
P2
P3
Standard (without dowel hole)
1 on top
1 on bottom
1 each on both top and bottom
H
Body surface treatment
Blank
S
Standard (blackening treatment)
Electroless nickel plating
018 D08 J1GS BS
Note on model no. selection
Note 1: Select the driver according to the table below.
Driver - power voltage table
* Contact CKD when ordering parts individually for maintenance.
Note 2: Use the optional flexible cable in applications where the cable is bent repeatedly.
Refer to page 3 for the cable dimensions.
Note 3: Designate body surface treatment and mounting base surface treatment with (C) and (H).
Note 4: "P2" and "P3" cannot be selected if "B" with blackening mounting base or
"BS"electroless nickel plating surface treatment mounting base is designated for (C) mounting base.
Note 5: Additionally machined sections may not have a treated surface.
Model
Driver type GS type driver
3 phase
200 to 230 VAC
Single phase
100 to 115 VAC
AX2006G
AX2012G
AX2018G
Blank
Blank
Blank
J1
J1
J1
E
Driver power voltage
Refer to the driver - power voltage table on the left.
**cable length
02
Blank
06
08
10
15
20
2 m
4 m
6 m
8 m
10 m
15 m
20 m
Flexible cable 4 m: DM
[Note]
Use the noise filter for the
motor cable if the cable is
longer than 6 m.
P1 S
Model Model no. of options
F
CE marking
Blank
K
Standard (CE marking not available)
CE marking
K
AX2000G Series
How to order
To Next Page
Loading...
