Need help?Do you have a question about the CKD GX8200 Series and is the answer not in the manual?
General| Power Supply | AC 220-240V, 50/60Hz |
|---|---|
| Refrigerant | R134a |
| Operating Temperature Range | 5-35°C |
| Type | Compressor type |
| Operating Humidity Range | 30% to 80% RH |
| Continuous Drainage | Yes (hose connection) |
Heat exchanger compatible with oil-free air, dust prevention with new stainless steel vessel.
Full bore type drain valve prevents blockage of drain piping.
Float type drain minimizes air loss, no air loss with condensate drainage.
Low pressure loss of less than 0.02MPa during rated operation.
Environmentally friendly refrigerants which do not destroy the ozone layer.
Models are classified by their processing capacity from 2.2kW up to 95kW.
Available in AC220V and AC380V options for different models.
Coefficients for inlet temperature, ambient temperature, and pressure for model selection.
Factors adjusted for various inlet air temperatures and pressure dew points.
Factors for pressure correction based on air pressure input.
Calculation of maximum allowed coefficient based on combined temperature factors.
Outline drawings and dimensional data for GX8208D, GX8215D, GX8222D, GX8237D.
Pressure drop vs. treated flow rate for GX8203D at various inlet pressures.
Pressure drop vs. treated flow rate for GX8204D at various inlet pressures.
Pressure drop vs. treated flow rate for GX8208D at various inlet pressures.
Pressure drop vs. treated flow rate for GX8215D at various inlet pressures.
General guidelines for safe handling, use, and maintenance of CKD products.
Explanation of DANGER, WARNING, and CAUTION labels for hazard identification.
Adhere to Freon collection laws for environmental protection during disposal/repair.
To Next Page
