298 672.0 - BA DO 208 / 204 MEGA 3.2.1
General information
IMPORTANT
The instructions contained in this manual
should be carefully read and observed by all
persons who are concerned with the operation,
maintenance and inspection of this machine,
in order to prevent accidents. Especially the
«SAFETY RULES» in this manual should be
read with the utmost care and adhered to.
The use of spare parts, accessories and ancil-
lary equipment, which are not originally manu-
factured by CLAAS, can change the specified
design characteristics of this CLAAS machine
or can detract from its functional performance,
with a possible adverse affect on the active and /
or passive operational safety of the machine
and its occupational safety standards (accident
prevention).
CLAAS are in no way liable for any damage or
personal injury caused through the use of other
than original or approved CLAAS parts, acces-
sories and ancillary equipment.
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes subsequently as
technical developments continue. Responsi-
bility for errors or omissions not accepted.
IMPORTANT: Front, rear, right and left refer
to the direction of forward travel.
General information
To Next Page
Loading...
Need help?
General
