Need help?Do you have a question about the Claas LEXION 780 and is the answer not in the manual?
General| Max. Speed | 40 km/h |
|---|---|
| Engine Manufacturer | Mercedes-Benz |
| Cylinders | 6 |
| Engine | Mercedes-Benz |
| Engine Model | OM 473 LA |
| Track Options | TERRA TRAC |
Identifies and describes the main functional parts of the combine harvester.
Illustrates and labels the controls on the main console for operation.
Details the specific control layout for the MONTANA system.
Describes switches for hazard lights, road travel, and front attachment folding.
Explains symbols found on Perkins and Mercedes-Benz steering columns.
Details the functions assigned to the C-MOTION multifunction lever.
Explains the primary indicators and readouts on the CEBIS display.
Describes the specific data shown on the CEBIS harvest display.
Explains how to adjust settings using CEBIS rotary switches and keys.
Details using the HOTKEY for frequent setting adjustments on the combine.
Lists and explains the meaning of various symbols on the CEBIS display.
Lists and explains the meaning of various symbols used with the HOTKEY system.
Guides users on how to navigate and operate the CEBIS menu system.
Outlines essential service operations and cleaning recommendations.
Explains methods for checking and adjusting belt tension on various systems.
Details maintenance for the sieve box drive belt and chopper stops.
Describes daily calibration steps for accurate machine data display.
Guides on learning AUTOCONTOUR settings and crop type selection.
Explains the function of dividers and lifters on the cutterbar.
Details adjustments for the cutterbar auger height and skid settings.
Provides instructions for fitting and connecting the side knife to the cutterbar.
Explains de-awning operation and the importance of cleaning the stone trap.
Outlines the goals of threshing and recommended settings for drum speed.
Details the impact of rotor speed and the operation of rotor cover plates.
Explains the role of the preparation pan and fan speed in grain cleaning.
Guides on adjusting sieves and monitoring returns for grain and chaff.
Details engaging/disengaging the straw chopper and blade maintenance.
Explains how to adjust the POWERSPREADER width and direction.
Provides aid for common grain quality problems like straw or broken grains.
Guides on determining where crop losses are occurring on the combine.
Explains the three driving strategies available with CRUISE PILOT.
Details the procedure for activating and deactivating the CRUISE PILOT system.
Explains symbols indicating limiting factors for CRUISE PILOT operation.
Guides on setting up and configuring CEMOS AUTOMATIC within the CEBIS menus.
Explains the main display areas and navigation within the CEMOS system.
Details how to activate and set up the LASER PILOT system.
Guides on activating GPS and using the S10 for path planning.
Guides on activating GPS and using the S7 for path planning.
Addresses frequent questions regarding machine operation and performance.
Provides recommendations for harvesting in wet and laid crop conditions.
Details essential seasonal calibration steps for optimal combine performance.
To Next Page
