48
If fitted CEMOS AUTOMATIC can be in the CEBIS menus, there will also be
no extra screen in the cab, the CEBIS mobile screen is not needed.
1.In the CEBIS menu
2.Bring up the CEMOS AUTOMATIC menu turn on the master switch,
AUTO CLEANING, AUTO SEPARATION and if fitted 4D CLEANING and
4D rotor cover plates
3.Set the desired strategy. Maximum throughput, minimum fuel used, high
threshing quality, balanced
4. Adjust the desired cleanliness of the grain (4)
5.Learn the inclinometer, only needs to be learnt once a year
TIP. When changing the crop type make sure that these are turned back on.
2
4
EASY: CEMOS AUTOMATIC in CEBIS
3
5
1
To Next Page
