Need help?Do you have a question about the Claas LEXION 670 and is the answer not in the manual?
General| Type | Combine Harvester |
|---|---|
| Number of Straw Walkers | 6 |
| Cleaning Area | 5.8 m² |
| Cylinders | 6 |
| Max. Travel Speed | 30 km/h |
| Grain Tank Capacity | 11, 000 liters |
| Unloading Rate | 110 liters/sec |
| Fuel Tank Capacity | 800 liters |
| Engine | Mercedes-Benz |
| Displacement | 9.3 l |
| Threshing Drum Width | 1700 mm |
| Cutting Width | Up to 12.2 meters |
Reference for operator training, familiarisation and settings of CLAAS LEXION combines.
Importance of the operator's manual for safe machine operation and adherence to specified procedures.
Diagram and specifications detailing the dimensions of the combine with front wheels.
Diagram and specifications detailing the dimensions of the combine with TERRA TRAC.
Detailed descriptions of the function of various components within the combine.
Details specific controls and tips for the MONTANA cab layout.
Identifies hazard warning lights, road travel switch, front attachment folding, and main beam.
Explains symbols for the steering column, including indicator lights and functions.
Details specific CEBIS displays for harvest operations, including yield, area, and ground speed.
Explains how to use the CEBIS rotary switch and adjust settings via the display.
Lists and explains symbols used within the CEBIS system for various machine functions.
Details how to navigate through the CEBIS menu using switches and buttons.
Lists and explains symbols associated with the HOTKEY for quick adjustments.
Describes procedures for adjusting belt tension using different guide systems.
Details on checking and maintaining sieve box drive belts and chopper stops.
Guides on learning AUTOCONTOUR stops and setting crop types for calibration.
Information on knife condition, table auger timing, and procedures for crop wrapping.
Details on adjusting auger height, retractable fingers, and skid settings for the cutterbar.
Describes the attachment and connection of the side knife and divider.
Explains fan speed adjustments, wind board, and wind throttle settings for cleaning.
Details on top and bottom sieve adjustments and monitoring returns volume/composition.
Details on adjusting POWERSPREADER width and direction via CEBIS.
Methods for checking losses from rotors and sieves, and using CEBIS monitors.
Flowchart for diagnosing and adjusting settings based on straw and returns issues.
Details on engaging, de-activating, and adjusting CRUISE PILOT modes.
Lists and explains symbols indicating limiting factors for CRUISE PILOT operation.
Guides on setting throughput sensitivity and how CRUISE PILOT behaves during unloading.
Details on activating GPS steering and setting AB lines using the S10 system.
Instructions for setting a new A=B line using the S7 steering system.
Recommendations for unloading wet grain, chopper operation, and handling wet conditions.
To Next Page
