32
Settings: Pre-Separation
TIP. Only engage these plates if
it is necessary. Try other settings
first.
TIP. The threshing segment should
only be fitted in hard to thresh
crops. Don’t forget you have fitted
them.
De-awning
De-awning can be carried out by
operating the lever by the right
hand front wheel of the machine,
which in turn closes or opens a
set of plates under the APS
concave. This gives the crop an
extra ‘rub’ which in turn threshes
it harder.
Stone trap
The stone trap is situated
between the front elevator and
the APS concave. It is important
that the stone trap is emptied
regularly to allow for foreign
objects to be expelled before they
enter the drum.
To Next Page
Loading...
