298 672.0 - BA DO 208 / 204 MEGA 1.1.1
Introduction
INTRODUCTION
The present Operator's Manual applies to the CLAAS
combine-harvesters
DOMINATOR 208 MEGA from serial no. 94503000
DOMINATOR 204 MEGA from serial no. 93503000
It is primarily intended to give the machine driver infor-
mation on setting, using and operating the machine.
Texts and pictures apply, in general, to all combine
models covered by this book, and the information
given applies equally, except where reference is made
to a particular model in captions to the pictures or in
the main text.
Operation and maintenance of important ancillary
equipment is also covered by this manual. Please read
the instructions which apply to the appropriate ancillary
equipment on your combine.
Provided you follow the advice on the care and servic-
ing of your machine you will be rewarded with reliable
and long service from your Combine Harvester.
We recommend that you allow your authorized
CLAAS Dealer to carry out the regular maintenance.
Omissions of parts of the maintenance schedule or
incorrect operation lead to a drop in performance and
cost valuable time. By correct servicing and operation
you can make full use of our sound experience and of
the latest technical knowledge in Combine Harvesting
with which your combine has been designed and
thereby insure reliability of your Combine Harvester.
This Operator's Manual can be ordered from your
CLAAS Dealer as well as the manuals listed below:
• Threshing Instructions for special crops
• Fitting and Operating Instructions for ancillary
equipment
CLAAS Service Department
Introduction
Find manuals at http://best-manuals.com/search?&s=CLA-2986720
To Next Page
Loading...
Need help?
General
