Page 4 WS1.5", 2" and 2"QC Drawings and Service Manual
Installation Summary
Installation Date: ___________________________________________
Installation Location: _______________________________________
Installer(s): _______________________________________________
Phone Number: ____________________________________________
Application Type: (Softener) _______ Other: ____________________
Water Source: ____________________________________________
Water Test Results:
Hardness: ___________ Iron: ___________pH:___________________
Other: ___________________________________________________
_________________________________________________________
Misc:
Service Flow Rates: min. _________ max. ___________
Tank Size: Diameter _________ Height: ______________
Resin or Media Volume: ___________________________
Resin or Media Type: _____________________________
Capacity: _______________________________________
Salt or Fill Setting per Regeneration: _________________
Brine Tank Size: _________________________________
Control Valve Confi guration:
Valve Type: _____________________________________
Valve Part Number: _______________________________
Valve Serial Number: _____________________________
Regenerant Refi ll Control: _________________ gpm/lpm
Injector Size: ____________________________________
Drain Line Flow Control: __________________ gpm/lpm
To Next Page
Loading...
