EasyManua.ls Logo

Clack Valves WS2 - 1 Unpacking and Parts Identification; Unpacking Notes; Basic Parts List; Missing or Damaged Goods

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FILOX WS ISS 1 \page 4
F i l o x S e r i e s F i l t e r
Installation Operation Maintenance Manual
1.0 UNPACKING AND PARTS LIST
1.1 UNPACKING NOTES
The unpacking of the Filter is quite straightforward, and there are no ‘hidden
items. It is advisable to keep the packages sealed until such time as they are
used, to prevent dust or water entry.
1.2 BASIC PARTS LIST
1. VALVE (c/w flow controllers on outlet and drain)
2. CLACK MANUAL
3. INSTRUCTIONS
4. VESSEL (c/w riser and distribution system)
5. 4” - 2 1/2” REDUCER (if required)
6. FILOX (qty as specified)
7. GRAVEL (qty as specified)
1.3 MISSING OR DAMAGED GOODS
Immediately on receipt of the goods, it is advisable to check that all items
ordered have been received. If you have any doubt that goods have been
supplied as requested, please contact your supplier immediately. If any items
are missing or damaged, the carrier and your supplier must be notified within 2
days of receipt if a claim is to be made.
2.0 TEMPORARY STORAGE
If installation is not to start immediately after delivery, the equipment should
be stored in a clean dry area, where it will not be damaged, or be subjected
to temperatures below freezing.

Other manuals for Clack Valves WS2

Related product manuals