Need help?Do you have a question about the clage CEX9 and is the answer not in the manual?
General| Type | Instantaneous water heater |
|---|---|
| Power rating | 9 kW |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Heating system | Electric |
| Specific water volume at Δt = 30 K | 4.3 l/min |
| Temperature range | 30 - 60 °C |
| Protection class | IP 25 |
| Energy efficiency class | A |
Adjusting the desired water temperature using arrow keys and setting specific temperatures.
Selecting preset temperatures quickly and assigning custom settings to program keys.
Activating a scalding protection feature to limit the maximum water temperature.
Restoring all appliance settings to their original factory defaults.
Tips for efficient energy use by setting the correct temperature and flow rate.
Indication when the appliance's full power is insufficient to heat water to the set temperature.
Handling situations where inlet water temperature exceeds the setpoint or using solar systems.
Procedure for purging air from the appliance after installation or maintenance.
Quick overview of program buttons for selecting preset temperatures and custom settings.
Condensed instructions for adjusting water temperature using arrow keys and convenience zone.
Summary of anti-scalding feature activation/deactivation via button combinations.
Concise guide to resetting appliance settings to factory defaults.
Understanding the 'MAX' indicator for appliance power limitations.
To Next Page
