Need help?Do you have a question about the clage CEX-U and is the answer not in the manual?
General| Type | Instantaneous water heater |
|---|---|
| Voltage | 400 V |
| Frequency | 50/60 Hz |
| IP-Rating | IP24 |
| Temperature Range | 20-60 °C |
| Control | Electronic |
| Weight | 3.5 kg |
| Installation | Wall mounted |
| Water Connection | G ½" |
Set temperature gradually using arrow keys. Changes by 1°C or 0.5°C in comfort zone.
Quickly select preset temperatures. Store custom settings by pressing buttons for a longer duration.
Optional scalding protection. Activate/deactivate by pressing specific key combinations for 3 seconds.
Recall all factory settings by pressing keys. Display counts down from '10' to '00'.
Set exact temperature needed. Avoid adding cold water to save energy and maintain constancy.
Indicates energy saving mode. Consumption depends on selected temperature and flow rate.
MAX indicator shows insufficient output. Reduce flow rate to resolve. Symbol indicates heating off.
Use with preheated water (e.g., solar). Ensure inlet temperature does not exceed setpoint.
Remove air bubbles before use or after maintenance. Disconnect power first and follow steps.
Wipe with damp cloth, avoid abrasives. Clean fittings regularly, inspect components every three years.
To Next Page
