Need help?Do you have a question about the clage CEX-U Series and is the answer not in the manual?
General| Type | Instantaneous Water Heater |
|---|---|
| Temperature Range | 20°C to 60°C |
| Installation | Wall-mounted |
| Energy Efficiency | A |
| Max. Permissible Pressure | 10 bar |
| Protection Class | IP 25 |
| Voltage | 400 V |
| Control | Electronic |
| Flow Rate | 2.5 l/min |
| Power Rating | 18 kW, 21 kW, 24 kW, 27 kW |
| Water Connection | G ½" |
Adjusts the required water temperature using arrow keys for gradual changes and convenience zone settings.
Quickly select or store preferred temperatures using dedicated programme buttons for convenience.
Activates scalding protection by setting a maximum limit temperature for the water output.
Recalls all factory settings by pressing specific buttons simultaneously for a defined period.
Guides on efficient usage by setting precise temperatures and avoiding mixing hot and cold water.
Indicates when the appliance operates in an energy-saving mode based on selected temperature and flow rate.
Shows when the appliance's output is insufficient for the tapped water quantity, indicated by 'MAX'.
Explains the behavior when operating with preheated water and exceeding inlet temperature limits.
Procedure to re-vent the appliance after maintenance or emptying to prevent dry running.
Instructions for cleaning surfaces, fittings, and periodic professional inspection of components.
To Next Page
