clage MCX 3 - User Manual

Malý elektronický průtokový ohřívač
MCX 3..7 SMARTRONIC
®
Návod k použití a montáži
Electronic instant water heater MCX 3..7 SMARTRONIC
®
Operating and installation instructions
05.12
CZ
EN
2-27
2-27

Summary

3. Critical Safety Instructions

5. Technical Specifications and Data

6. Typical Installation Scenarios

6.1. Vented Installation with Open Outlet Tap

6.2. Unvented Installation for Pressurized Appliances

7. Installation and Operation Compliance

7.1. Closed Outlet Installation: Non-Return Valve Notice

Provides a critical warning regarding the placement of non-return valves in closed outlet installations.

9. Step-by-Step Appliance Installation

10. Electrical Connection and Safety

11. Purging Air from the System

12. Initial Commissioning and Start-up

14. Adjusting Water Flow Rate

14.1. Decreasing Water Flow

Details how turning the screw clockwise reduces flow and increases temperature.

14.2. Increasing Water Flow

Details how turning the screw counter-clockwise increases flow and reduces temperature.

15. User Operation Guide

15.1. Temperature Setting and Selection

15.2. Key Lock and Temperature Security

16. Cleaning and Routine Maintenance

17. Troubleshooting Common Issues and Service

clage MCX 3 Specifications

General

Type	Instantaneous water heater
Application	Hand washbasin
Power Rating	3.5 kW
Rated Voltage	230 V
Rated Current	15.2 A
Fuse Protection	16 A
Protection Class	IP 25
Energy Efficiency Class	A
Flow Rate	2 l/min
Hydraulic system	Hydraulic
Installation Type	Oversink / Undersink
Dimensions (H x W x D)	13.5 x 18.6 x 8.7 cm