EtherUSB and EthIR LAN AdminTool User Manual
The page will be refreshed once is clicked.
Network Settings – USB Ports
The Network Settings – USB Ports page displays the Default IP Group or Alternative
IP Group settings for USB ports. The user can modify the fields and click on Apply to
have the new settings saved into flash memory. All modifications will take effect only
after
and “System Restart” are selected on the Admin Settings page or the
unit is power cycled.
The following box will be prompted once
is clicked.
The page will be refreshed once
is clicked.
System Admin. – Admin Settings
Clarinet Systems, Inc //www.clarinetsys.com Page 5
To Next Page
Loading...
