Need help?Do you have a question about the Clarion APX280M and is the answer not in the manual?
Essential advice for safely mounting the amplifier to prevent damage or hazards.
Critical guidelines for correctly wiring the amplifier to prevent electrical damage or shorts.
General| Channels | 2 |
|---|---|
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| THD at Rated RMS Power | 0.05% |
| Input Voltage/Sensitivity | 200mV - 4V |
| Crossover Frequency | 50Hz - 500Hz |
| Bass Boost | 0 - 12dB @ 45 Hz |
| Bridged RMS Power @ 4 Ohms | 140W x 1 |
| Signal to Noise Ratio | 90 dB |
| Frequency Response | 10Hz-30kHz |
To Next Page
