Need help?Do you have a question about the Clarion XC2510 and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | >95dB |
| THD at RMS Output | <0.05% |
| Bass Boost | 0-12dB |
| Bass Boost Frequency | 45Hz |
| RMS Power at 4 Ohms | 50W x 4 + 200W x 1 |
| RMS Power at 2 Ohms | 75W x 4 + 300W x 1 |
| Input Sensitivity | 0.2V - 6V |
Important safety advice for installing the audio equipment correctly.
Guide on adjusting the amplifier's nominal operating level for various inputs.
Explanation of the bass boost circuit and its use for low-frequency enhancement.
Using frequency controls and crossover modes for advanced system design.
Instructions for connecting source units that lack RCA outputs using speaker level inputs.
Lists the items included in the product packaging, such as the amplifier and screws.
Important considerations and warnings for securely mounting the amplifier unit.
Essential guidelines and warnings for making safe and correct electrical connections.
Diagrams and instructions for connecting power and speaker outputs to the amplifier.
Illustrations and explanations of different ways to use the amplifier in audio systems.
Steps for adjusting the amplifier's gain to match the source unit's output.
Guidance on adjusting the crossover frequencies for optimal audio filtering.
Instructions on how to apply and adjust the bass boost feature.
Procedures for verifying correct installation and performance after setup.
To Next Page
