Clarion XC1410

Owner's
&
Installation manual
Mode d'emploi et
manuel d'installation
Manual
de instrucciones
y
de instalaci6n
XC1410
XC
AMPLIFIER
AMPLIFICATEUR XC
AMPLIFICADOR
XC

Clarion XC1410 Specifications

General

Channels	4
RMS Power at 4 Ohms	50W x 4
RMS Power at 2 Ohms	75W x 4
Bridged RMS Power at 4 Ohms	150W x 2
Total Harmonic Distortion (THD)	<0.05%
Signal to Noise Ratio	>90 dB
Frequency Response	20 Hz - 20 kHz
Crossover Frequency	50 Hz - 500 Hz
Input Sensitivity	200mV - 5V

Summary

Connection for Power and Speakers

Power and Speaker Connections

Details on connecting power supply and speakers to the amplifier.

Input Connections and Audio Controls

Explains RCA and speaker inputs and associated controls.

Installation and Precautions

Mounting Precautions

Advice on safe and effective placement of the amplifier.

Wiring Precautions

Crucial safety and best practice guidelines for electrical connections.

Wiring and Applications

4-Channel Full Range Stereo System (Low Level RCA)

Explains connecting the XC1410 to a headunit via RCA for 4 speakers.

4-Channel Full Range Stereo System (High Level Speaker Input)

Explains connecting the XC1410 to a headunit via speaker wires for 4 speakers.

Setup and Operation

Setting the Gain

Guide on adjusting input sensitivity for optimal audio performance.

Setting the Crossover

Instructions for selecting the amplifier's crossover frequency.

Final System Check

Steps to verify correct installation and initial operation of the system.

Troubleshooting and Specifications

Troubleshooting

Common issues and their solutions for the XC1410 amplifier.

Product Specifications

Technical details and performance metrics of the XC1410 amplifier.