Remote Control (Sold by separately)
Notes of remote control using
Inserting the Battery
1. Slide remote control unit’s rear cover in
the direction shown.
2. Insert battery (CR2025) into insertion
guides with printed side (+) up.
3. Press battery into compartment as shown.
4. Replace and slide cover until it clicks into
place.
1. Aim the remote control at the remote sensor
on the unit.
2. Remove the battery from the remote control
or insert a battery insulator if the battery has
not been used for a month or longer.
3. DO NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function properly.
4. Use “button shaped” lithium battery “CR2025”
(3V) only.
5. DO NOT recharge, disassemble, heat or
expose the battery in re.
6. In sert th e b atter y i n prop e r dire c tion
according to the (+) and (-) poles.
7. Store the battery in a place where children
cannot reach to avoid the risk of accident.
[POWER/SRC] Key
• Toggle the audio source / Power on
/ Power off (long press)
[
, ] Key
• Preset station up/down / Previous/
next track / Search(long press)
[SCN/PS/AS] Key
• Scan play / Preset scan / Auto
memory store
[BND/TOP] Key
• Select tuner band / Top play (long
press)
[ , ] Key
• Volume up / down
[ ] Key
• Play / Pause
[ISR] Key
• Recall ISR station stored in memory
and store current station in ISR
memory (long press)
[DISP] Key
• Display switch
[RDM] Key
• Random play
[ , ]
[ ]
SRC
POWERDISC UP
TOP
BND
MUTEDISPISR
SCN
PS/ASTV/VTR
RDMRPT
[POWER/
SRC]
[BND/TOP]
[DISP]
[ISR]
[RDM]
[RPT]
[ , ]
[MUTE]
[SCN/
PS/AS]
VOLUME
SEARCH
[RPT] Key
• Repeat play
To Next Page
Loading...
Need help?
General
