TV Operations
English
25 CZ309A
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
∗ The factory default setting is “ON”.
1. Press and hold the [DISP] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [x] or [v] button to select “TV
DIVER”.
3. Press the [w] or [z] button to set to “ON” or
“OFF”.
•ON:
Sets the diver setting to ON.
•OFF:
Sets the diver setting to OFF.
4. Press the [DISP] button to return to the
previous mode.
CZ309A_ENG.book Page 25 Thursday, November 27, 2008 1:53 PM
To Next Page
Loading...
Need help?
General
