To Next PageTo Next PageWhy does my Clarion Radio not turn on?
If your Clarion Radio does not turn on or produce any sound, it might be due to a blown fuse. Replace the blown fuse with a new one that has the same amperage.
Why is the sound bad on my Clarion Radio after turning it on?
If the sound from your Clarion Radio is bad immediately after turning it on, especially if the car has been parked in a humid environment, water droplets might have formed on the internal lens. Leave the radio on for about 1 hour to let it dry.
What to do if my Clarion Radio displays CD ER6?
If your Clarion Radio displays 'CD ER6', it means the table of contents (TOC) of the CD cannot be read. This is because the disc is upside down.
Why does my Clarion Radio sound skip?
If your Clarion Radio sound skips or is noisy, the compact disc you are using might be heavily scratched or warped. Replace it with a compact disc that has no scratches.
Why won't my Clarion Car Receiver turn on?
There are a couple of potential reasons why your Clarion Car Receiver isn't powering on. It could be due to a blown fuse. In this case, replace the fuse with one of the same amperage. If the fuse blows again, consult your store of purchase. Another possibility is incorrect wiring. If you suspect this, consult your store of purchase.
What to do if my Clarion Car Receiver sound skips?
If the sound from your Clarion Car Receiver skips or is noisy, the compact disc may be dirty. Try cleaning it with a soft cloth. Alternatively, the compact disc might be heavily scratched or warped, in which case you should replace it with a compact disc that has no scratches.
Why is the sound bad right after turning on my Clarion Car Receiver?
If the sound quality of your Clarion Car Receiver is poor immediately after turning it on, it may be due to water droplets forming on the internal lens when the car is parked in a humid place. To resolve this, let the unit dry for about 1 hour with the power on.
What to do if my Clarion Car Receiver compact disc cannot be loaded?
If your Clarion Car Receiver won't load a compact disc, it might be because another compact disc is already loaded. Eject the current compact disc before trying to load a new one.
General| Type | Car Receiver |
|---|---|
| Brand | Clarion |
| Model | DB125 |
| DIN Size | Single DIN |
| Channels | 4 |
| Bluetooth | No |
| Display | LCD |
| MP3 Playback | Yes |
| ID3 Tag Display | Yes |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 80dB |
| Tuner | AM/FM |
| Aux Input | Yes |
Details critical safety warnings regarding operation, adjustments, and potential hazardous radiation exposure.
Defines and explains the function of each button on the device's front panel.
Guidance on loading, playing, pausing, and ejecting compact discs.
Addresses issues with the unit not powering on, likely due to fuse or wiring problems.
Solutions for when a compact disc cannot be loaded into the unit.
Troubleshooting steps for noisy or skipping audio, often related to disc condition.
Addresses sound issues immediately after powering on, possibly due to condensation.
Indicates a fault in the unit's mechanism, such as a disc not being ejected.
Signifies an issue with pickup focus, possibly due to a scratched disc.
Indicates the CD's table of contents cannot be read, e.g., disc is upside-down.
Covers compliance, design changes, and critical warnings about external amplifier connections.
