Clarion DB335 - Specifications

11. SPECIFICATIONS
Notes:
• Specifications comply with EIA Standards.
• Specifications
and design are subject to change with-
out notice for further improvement.
• Please make sure when connecting external power
amplifier, that you properly,
to the car chassis, ground
the amplifier.
•
If this is not done, severe damage to the source unit
way happen.
General
Power Supply Voltage: 14.4 V DC (10.8 V to 15.6
V allowable), negative ground
Current Consumption: Less than 15A
Speaker Impedance: 4 Q (4 Q to 8 Q allowable)
Weight: 2.42
lb. (1.1 kg)
Dimensions:
7" (178 mm) Width X 2" (50 mm) Height x
6"(152 mm) Depth
7" 2"
1--(178 mm) -'-~I 1--1 (50 mm)
~[D 0
FM Tuner
Frequency Range: 87.9 MHz to 107.9 MHz
Usable Sensitivity:
11 dBf
50 dB Quieting Sensitivity: 17 dBf
Alternate Channel Selectivity: 75 dB
Stereo Separation
(1 kHz): 35 dB
Frequency Response
(±3 dB): 30 Hz to 15 kHz
AM Tuner
Frequency Range: 530 kHz to 1,710 kHz
Usable Sensitivity:
25 IN
CD Player
System: Compact disc audio system
Usable Discs: Compact disc
Frequency Response:
10Hz to 20 kHz (±1 dB)
Signal-to-Noise Ratio: 100 dB
(1 kHz) IHF-A
Dynamic Range:
95 dB (1 kHz)
Harmonic Distortion: 0.01%
Audio
Maximum Power Output:
200 W (50 W X 4 ch)
Continuous Average Power Output:
17 W X
4, into 4Q, 20 Hzto 20 kHz,1 %THD
Bass Control Action (30
HZ): ±14 dB
Treble Control Action (10 kHz): ±14 dB
Line Output (with
AlC 1 kHz, 10 kQ): 1.7V
16 08335/08235
l __ ~2=3/8" j
(188mm)
-J-._-J- 2-1/4"
(58mm)