Basic Operations
Note: Be sure fo read fhis chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 5 (unfold).
Power
0 Turning ON the Power
Press the [FNC] button.
0 Turning OFF the Power
Press the [FNC] button for at least 1 second.
Selecting the Source
Press the [FNC] button.
Source required
Tuner
CD
Standby
(Illumination onlv mode)
Display
“TUNER”
“CD”
“ALL OFF”
Volume
0 Increasing Volume
Press the [A] button
0 Decreasing Volume
Press the [v] button.
Mute
Turning the volume down quickly.
Press the [MUTE] button.
Each time the button is pressed the Mute turns
ON or OFF.
When it’s ON, the “MUTE” indicator blinks.
Loudness
Compensating for low and high tones during low
volume.
Press the [MUTE] button for at least 1 sec-
ond.
Each time the button is pressed for at least 1
second the Loudness turns ON or OFF.
When it’s ON, “LOUD ON” is displayed.
Beat EQ Light
You can recall the best sound setting preset for
different types of the music.
1. Select the source to set
Press the [FNC] button.
2. Select the Sound type
Press the [BEQ LIGHT] button.
Each time the button is pressed the sound set-
ting switches.
Sound setting Display
User memory “User”
Rock
“Rock”
Pops “PODS”
Easy
“Easy”
Too 40 “Too40”
Jazz
Flat
“Jazz”
“Flat”
Notes:
l
User memory: The values set on the <Audio
Mode>.
l
Each setting value is changed with the <Speaker
Setting>. First, select the speaker type with the
Speaker setting.
Audio Mode
1. Select the source for adjustment
Press the [FNC] button.
2. Enter Audio mode
Press the [BEQ LIGHT] button for at least 1
second.
3. Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
4. Adjust the Audio item
Press the [a] or [)>I button.
Adjustment
Item Display Range
Bass level “Bas” -8 - +8
Middle level “Mid” -8 - +8
Treble level “Tre” -8 - +8
Balance “Bal” Left 15 - Riaht 15
Fader “Fad” Rear 15 - Front 15
Volume offset “V-OFF” -8 - +O
Note:
l
Volume offset Each source’s volume can be set
as a difference from the basic volume.
5. Exit Audio mode
Press the [BEQ LIGHT] button.
DE625MP
"Rock"
"User"
Display
"Pops"
Rock
User memory
Pops
Each time the button is pressed the sound set·
ting switches.
Sound setting
Note: Be sure
to
read this chapter referring
to
the front diagrams
of
I
chapter
"2.
CONTROLS"
on
page 5 (unfold).
Basic Operations
Power
• Turning
ON
the Power
Press the
[FNC]
button.
• Turning OFF the Power
Press the
[FNC]
button for at least 1 second.
Selecting the Source
Press the
[FNC]
button.
Source required
Tuner
Display
"TUNER"
Easy
Top
40
Jazz
Flat
"Easy"
"Top40"
"Jazz"
"Flat"
Mute
Turning the volume down quickly.
Press the [MUTE] button.
Each time the button
is
pressed the Mute turns
ON
or
OFF.
When it's ON, the "MUTE" indicator blinks.
Loudness
Compensating for low and high tones during low
volume.
Press the [MUTE] button for at least 1 sec·
ond.
Each time the button is pressed for at least 1
second the Loudness turns ON
or
OFF.
When it's ON,
"LOUD
ON"
is displayed.
Notes:
• User memory: The values
set
on the <Audio
Mode>.
• Each setting value is changed with the <Speaker
Setting>. First, select
the
speaker type with the
Speaker setting.
Rear 15 - Front 15
Range
Left 15 - Right 15
-8
-
±O
-8
- +8
-8
- +8
-8
-
+8
"Fad"
Display
"Bal"
"Bas"
Volume
offset "V·OFF"
Fader
Treble level "Tre"
Balance
Middle level "Mid"
Bass level
Audio
Mode
1.
Select the source for adjustment
Press the
[FNC]
button.
2. Enter Audio mode
Press the [BEQ LIGHT] button for
at
least 1
second.
3.
Select the Audio item for adjustment
Press the [FM]
or
[AM] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
4.
Adjust the Audio item
Press the
[<<ill]
or
[~>]
button.
Adjustment
Item
"CD"
"ALL OFF"
CD
Standby
(Illumination only mode)
Volume
• Increasing Volume
Press the
[A]
button.
• Decreasing Volume
Press the
[V]
button.
Beat EQ Light
You
can recall the best sound setting preset for
different types of the music.
1.
Select the source to set
Press the
[FNC]
button.
2.
Select the Sound type
Press the [BEQ LIGHT] button.
Note:
•
Volume
offset: Each source's volume can be set
as a difference from the basic volume.
5.
Exit Audio mode
Press the [BEQ LIGHT] button.
DB625MP
13
To Next Page
Loading...
