Clarion DXZ778RUSB - Page 20

Basic Operations
English
20
DXZ778RUSB
● Setting the P.EQ ON/OFF
∗ The factory default setting is “ OFF ”.
2-1. Select “ P.EQ ON/OFF ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ ON ” or “ OFF ”.
● Setting the EQ SELECT
∗ The factory default setting is “ P.EQ ”.
2-1. Select “ EQ SELECT ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ P.EQ ” or “ B/T ” (Bass/
Treble).
● Setting the Subwoofer
∗ The factory default setting is “ OFF ”.
2-1. Select “ SUB WOOFER ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ ST ”, “ MONO ” or
“ OFF ”.
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time.
∗ If a CT data is not being received, “ – –:– –CT ”
appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
DXZ778RUSB_EN.book 20 ページ ２００６年１２月２６日 火曜日 午後２時２５分