Clarion DXZ778RUSB User Manual

English
42
DXZ778RUSB
TV Operations
Note:
• The following operations are performed the same
as for radio mode:
∗ Channel selection
∗ Storing channels in memory
∗ Calling channels from memory
∗ Auto store
∗ Preset scan
See “ Radio Operations ” (page 21-22) for details.
TV tuner functions
When an optional TV tuner is connected
through the CeNET cable, this unit controls all
TV tuner functions. To watch TV requires a TV
tuner and monitor.
Watching a TV
1. Press the [ SRC ] button and select the TV
mode.
2. Press the [ MENU ] button to select the
desired TV band (TV1 or TV2). Each time
the button is pressed, the input selection
toggles between TV1 and TV2.
3. Push the [ SEEK PANEL ] leftward or
rightward to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Press the [ OPTION ] button.
2. Push the [ SEEK PANEL ] leftward or
rightward to select “ TV/VTR ”.
3. Press the [ ] button to enter the VTR
mode.
4. To return to the TV broadcast, press the
[ OPTION ] button.
5. Press the [ ] button to return to the
TV mode.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ OPTION ] button to switch to the
adjustment selection display.
2. Push the [ SEEK PANEL ] leftward or
rightward to select “ TV AREA ”.
3. Press the [ ] button.
4. Push the [ P.CH ] button upward or downward
to select the reception area.
5. Press the [ ] button to return to the
adjustment selection mode.
6. Press the [ OPTION ] button to return to the
previous mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the [ OPTION ] button to switch to the
adjustment selection display.
2. Push the [ SEEK PANEL ] leftward or
rightward to select “ TV DIVER ”.
3. Push the [ P.CH ] button upward or downward
to set to “ ON ” or “ OFF ”.
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
4. Press the [ OPTION ] button to return to the
previous mode.
DXZ778RUSB_EN.book 42 ページ ２００６年１２月２６日 火曜日 午後２時２５分

Clarion DXZ778RUSB Specifications

General

Brand	Clarion
Model	DXZ778RUSB
Category	Car Receiver
Language	English