Basic Operations
English
22 DXZ785USB
● Setting the P.EQ ON/OFF
∗ The factory default setting is “OFF”.
2-1. Select “P.EQ ON/OFF”.
3-1. Push the [P.CH] button upward or
downward to select “ON” or “OFF”.
● Setting the EQ SELECT
You can change the equalizer that adjusts the
sound quality.
∗ The factory default setting is “P.EQ”.
2-1. Select “EQ SELECT”.
3-1. Push the [P.CH] button upward or
downward to select “P.EQ” or “B/T” (Bass/
Treble).
● Setting the Subwoofer
∗ The factory default setting is “ST”.
2-1. Select “SUB WOOFER”.
3-1. Push the [P.CH] button upward or
downward to select “ST”, “MONO” or
“OFF”.