Clarion DXZ788RUSB User Manual

Operations Common to Each Mode
English
36 DXZ788RUSB
● Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗ The factory default setting is “OFF”.
2-1. Select “BLINK LED”.
3-1. Push the [P.CH] button upward or
downward to select “ON” or “OFF”.
● Setting the external amplifier
∗ The factory default setting is “OFF”.
2-1. Select “AMP CANCEL”.
3-1. Push the [P.CH] button upward or
downward to select “ON” or “OFF”.
•ON:
Use with connected AMP.
•OFF:
Use with inside AMP.
● Set the cellular phone connection
mode (AUX/CeNET)
You can listen to your telephone calls from the
speakers connected to this unit.
∗ The factory default setting is “AUX”.
2-1. Select “TEL SEL”.
3-1. Push the [P.CH] button upward or
downward to select “AUX” or “CENET”.
•AUX:
AUX input cable is for cellular phone audio
input. When the AUX input cable is used to
connect a AUX BLUETOOTH BB (BLT373)
(sold separately).
•CeNET:
CeNET input cable is for cellular phone
audio input, when a CeNET cable is used
to connect a cellular phone (BLT583) (sold
separately). See “Bluetooth BB
Operations” (page 42-44) for details.
● Setting the car speaker output for the
cellular phone
∗ The factory default setting is “R”.
∗ To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select “TEL-SPEAKER”.
3-1. Push the [P.CH] button upward or
downward to select “R” or “L”.
•R:
Telephone calls can be heard on the front
right speaker connected to this unit.
•L:
Telephone calls can be heard on the front
left speaker connected to this unit.
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
2-1. Select “TEL-SWITCH”.
3-1. Push the [P.CH] button upward or
downward to select the setting in the
following order:
“OFF” ↔ “ON” ↔ “MUTE”
• OFF:
This unit continues normal operation even
when the cellular phone is used.
•ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
pushing the [P.CH] button upward or
downward.
•MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
01_DXZ788RUSB_EN.book 36 ページ ２００７年１１月２７日 火曜日 午後６時３４分

Clarion DXZ788RUSB Specifications

General

Brand	Clarion
Model	DXZ788RUSB
Category	Car Receiver
Language	English