Radio Operations
Listening
to the radio
1.
Press the [MENU] button, and touch the
[TUNER] key.
o The TUNER mode screen
is
displayed.
:E
~
ttl
....
Vl~
3
Ql
:::l
C
Ql
2.
Press the [BAND] button or touch the [Band]
key to select the radio band. Each time the
button
is
pressed, the radio reception band
changes
in
the following order:
FM1
...
FM2'" FM3'"
AM
...
FM1
...
Seek
tuning
1.
Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2.
Touch the [
.....
] or
[~]
key to automatically
seek a station.
• When touching the
[~]
key, the station
is
sought
in
the direction of higher
frequencies.
• When touching the [
.....
] key, the station
is
sought
in
the direction of lower frequencies.
Selecting
presets
by
direct
access
This function displays the Key Pad
on
the screen
allowing you to tune by entering a preset number.
1.
Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2.
Touch the [DIRECT] key to display the Key
Pad screen.
3.
Touch the [0] to [9] key corresponding with the
preset you desired. When you input the
wrong number, touch the
[~
] key to delete
the last input number.
4.
Touch the [ENT] key to tune
in
to the entered
preset.
Manual
tuning
1.
Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2.
Touch the [
....
] or [
..
] key to manually
select a station.
• When touching the [
..
] key, the frequency
is tuned
in
the direction of higher
frequencies.
• When touching the [
....
] key, the frequency
is tuned
in
the direction of lower frequencies.
Recalling a
preset
station
There are total of 48 preset positions (12-FM1,
12-FM2, 12-FM3, 12-AM) to store individual
radio stations
in
memory.
There are 2 ways available to recall the preset
station.
.Using
the remote
controller
1.
Press the [BAND] button to select the desired
band (FM or AM).
2.
Press the preset number desired
on
the 0-9
numeric keypad.
• Using the Preset
List
screen
1.
Touch the [List] key.
2.
Touch the corresponding Preset key to recall
the stored station.
*
You
can
select
the
desired
band
by
touching
the
[Band]
key.
Scroll
through pages
using
scroll bar buttons
to
the
right of the presets.
* Touching
and
holding
the
desired Preset
key
for
more
than
2 seconds
will
store the current
station
to
the
preset
memory.
3.
Touch the [List] key
to
return to the previous
screen.
Manual
memory
1.
Touch the [Band] key to select the desired
band. (FM or AM)
2.
Select the desired station with the seek
tuning, manual tuning, or preset tuning.
3.
Touch the [List] key.
4.
Touch and hold one of the Preset key for more
than 2 seconds to store the current station into
the preset memory.
5.
Scroll through the 3 pages of presets
in
each
band by pressing the scroll bar buttons to the
right of the presets.
21
VRX485VD/MAX385VD
To Next Page
Loading...
