EasyManuals Logo

Clarion UNGO MS5500 User Manual

Clarion UNGO MS5500
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Arming Mode Selection
Your system can be set in one of the following Arming Modes:
• Passive (automatic) Arming with chirp confirmation
Active Arming (by Remote Only)
• Passive (automatic) Arming without chirp confirmation
To set the Arming Mode:
1. Turn the ignition on.
2. Within 4 seconds, press Buttons 1 and 2 together.
First push: one chirp = Passive Arming with chirp
Second push: two chirps = Active Arming
Third push: three chirps = Passive without chirp
3. Turn the ignition off to save your selection.
Passive Arming
When the Arming Mode has been set for Passive Arming, the system arms itself automatically,
each time the ignition is turned off and all of the doors, hood and trunk are closed.
To start the Passive Arming Process:
1. Turn off the ignition.*
• The status LED will begin to flash quickly.
2. Open the door and exit the vehicle.
• Once all doors are closed and the dome light is turned off, the LED will turn off.
3. After 20 seconds,
• The siren will chirp.
• The parking lights will flash.
• The doors will lock.**
• The status LED will flash red, indicating the system is armed.
4. The system is now armed.
* The ignition must have been on for at least 4 seconds before the Passive Arming sequence will begin.
** If the Passive Locking feature is selected.
To temporarily disable Passive Arming, you can turn the ignition key on then off, within 4 seconds.
The status LED will stop flashing, and the system will not passively arm until the next time the
key is on for more than 4 seconds. This feature is useful for turning off passive arming when
refueling or washing your car or if you want to sit in your car and do not want the system to arm.
Panic Mode
Allows you to instantly trigger the alarm in an emergency situation by the Remote Transmitter.
To enter Panic Mode:
1. Press and hold Button 1 for 2 seconds.
• The system will trigger.
2. Press Button 1 again to stop Panic Mode.*
If Panic Mode is not stopped by the Remote, it will automatically time out after 40 seconds, and
the system will return to its prior Armed/Disarmed state.
*In Convenience Mode and Driver Door Priority Mode, Press Button 2 to stop Panic Mode.
Emergency Override
MS5500 Owner’s Manual - Page 9
MS5500_owner’s 1.34.qxd 12/6/99 12:15 PM Page 9

Other manuals for Clarion UNGO MS5500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion UNGO MS5500 and is the answer not in the manual?

Clarion UNGO MS5500 Specifications

General IconGeneral
BrandClarion
ModelUNGO MS5500
CategoryCar Alarm
LanguageEnglish

Related product manuals