Need help?Do you have a question about the Clarion UNGO Pro Security S670 and is the answer not in the manual?
General| Type | Car Alarm |
|---|---|
| Remote Control | Yes |
| Shock Sensor | Yes |
| Siren | Yes |
| Battery Backup | Yes |
| Door Trigger | Yes |
| Starter Kill | Yes |
| Panic Mode | Yes |
| Valet Mode | Yes |
| Compatibility | Most Vehicles |
| Arming Type | Remote |
| Alarm Type | Audible, Visual |
| LCD Display | Yes |
Explains how to configure the LCD 2-way remote.
Details the functions of the standard 4-button remote.
Describes extra controls for the LCD 2-way remote.
Covers general maintenance, including remote battery replacement.
Provides FCC compliance information for the device.
Explains how the system signals and pages the transceiver.
Describes how the transceiver recognizes and displays triggered responses.
Covers active and passive arming methods for the system.
Explains how the system reacts to impacts and triggers.
Details standard, high-security, and remote-less disarming methods.
Covers silent mode, valet mode, panic mode, clock setting, and NPC circuitry.
Explains system feedback during arming and disarming, including tamper alerts.
Details audible chirps and zone table for system status and troubleshooting.
Discusses the system's operating frequency and its benefits.
Explains how the system retains its state after power loss.
Describes an audio sensor for detecting glass breakage.
Explains the function of the backup battery.
Details a radar sensor for intrusion detection.
Describes how the system controls power door locks.
Explains the trunk release accessory output.
Describes a feature for unlocking doors sequentially after disarming.
Explains how the horn can be used for alarm notifications.
Details how the interior light behaves when the alarm is armed or disarmed.
Defines terms like Control Unit, LCD Remote, and LED.
Explains terms like Shock Sensor, Trigger, Warning Zone Response, Starter Interrupt.
Covers terms like Valet Button, Zone, and Input.
To Next Page