Need help?Do you have a question about the Clarion UNGO MS5500 and is the answer not in the manual?
Lists optional inputs and outputs for a customized security system.
Illustrates the buttons and LED indicator on the remote transmitter.
Default mode where Button 1 arms/disarms and Button 2 controls Aux 1.
Allows separate Arm and Disarm buttons for easier operation.
Unlocks only the driver's door upon disarming, then all doors.
Controls multiple Ungo systems with a single remote transmitter.
Steps to arm the vehicle security system using the remote.
Steps to disarm the vehicle security system using the remote.
Indicates triggered zones upon disarming via LED flashes or chirps.
Temporarily cancel arming/disarming chirps by pressing two buttons.
System arms automatically when ignition is off and doors are closed.
Instantly triggers the alarm via remote transmitter in emergency.
Procedure to disarm the system using ignition key and override switch.
Temporarily disables the security system for servicing or parking.
Automatically locks doors 10 seconds after ignition key is turned on.
Automatically unlocks doors after the ignition key is turned off.
Controls the dome light upon disarming or ignition off.
Controls features like electric trunk release, typically via Button 2.
Supports momentary, latched, or timed outputs for accessories.
Allows trunk access while system is armed without triggering alarm.
Details voltage, current, temperature range, and output capabilities.
To Next Page
General