Need help?Do you have a question about the Clarion Ungo Pro Security SR1000 and is the answer not in the manual?
General| Type | Car Alarm |
|---|---|
| Model | SR1000 |
| Remote Start | Yes |
| Two-Way Communication | Yes |
| Shock Sensor | Yes |
| Panic Mode | Yes |
| Range | Up to 1 mile |
| Keyless Entry | Yes |
| Remote Control | Yes |
| LCD Display | Yes |
| Starter Kill | Yes |
| Door Lock Control | Yes |
| Trunk Release | Yes |
| Valet Mode | Yes |
| Battery Backup | Yes |
| Compatibility | Universal |
Lists warranty coverage for main unit, remotes, siren, etc.
Proof of purchase is required for warranty service.
Excludes damage from alterations, misuse, neglect, abuse, water, or removed serial numbers.
Clarion's liability is limited to repair or replacement of the product.
Product must be shipped prepaid and insured; Clarion is not responsible for shipping loss/damage.
This warranty grants specific legal rights that may vary by state.
Provides phone number and address for warranty service assistance.
Lists the components included with the system, such as control module, remotes, siren.
Advises on system complexity and authorized dealer installation for warranty.
Describes remote battery life and indicators of weakening.
States compliance with FCC rules and conditions for operation.
Warns that the product is for fuel-injected, automatic transmission vehicles only.
Explains that remotes are programmed with a standard configuration but can be customized.
Details the functions of individual buttons on the remote for arming, disarming, panic, etc.
Explains how pressing multiple buttons together activates features like Timer Mode or Channel 4/5 output.
Lists critical safety warnings for system installation and operation, especially regarding enclosed spaces.
Details precautions for remote starting, like avoiding enclosed spaces and checking neutral safety.
Explains how to arm the system using the remote and what indicators to expect.
Describes how the system can be programmed to arm automatically after ignition off and door closure.
Explains how impacts, door openings, and ignition trigger different alarm responses.
Details how to select which system inputs are active or bypassed using the remote.
Explains how to arm the system while the vehicle is running.
Describes the process of disarming the system using the remote and associated indicators.
Allows silencing the siren without disarming the system, useful for accidental triggers.
Explains how to disarm the system manually using the ignition key and override switch.
Explains how to use silent arm/disarm to eliminate confirmation chirps.
Describes how to activate panic mode using the remote to attract attention.
Explains how to disable automatic arming and triggering for vehicle servicing.
Steps to enter or exit override mode using the ignition and override switch.
Steps to enter or exit override mode using the remote.
Introduces the feature for remotely starting and running the vehicle.
Critical warnings about remote starting with keys in ignition or vehicle not in park/neutral.
Step-by-step instructions to start the vehicle using the remote.
Crucial warning against operating the vehicle in enclosed spaces due to exhaust hazards.
Steps to drive the vehicle after remote start, including using the brake pedal.
Lists conditions that automatically shut down the engine during remote start.
Explains how to leave the vehicle running after removing the key.
Steps to activate the override take-over feature.
Describes the mode for keeping the engine running to cool down the turbo.
Steps to activate the short-run/turbo mode.
Explains how to use timer mode for programmed engine run durations.
Steps to activate timer mode using specific remote buttons.
Prevents starter engagement during remote start to avoid damage.
Explains how to temporarily disable the remote engine start feature using a toggle switch.
Monitors engine speed and shuts off the engine if RPMs are too high or low.
Lists inputs like hood and brake that shut down or prevent remote start.
Prevents repetitive trigger sequences from faulty sensors or environmental factors.
Illustrates how the system bypasses sensors after multiple false triggers.
Describes chirps indicating arming status and open zones.
Explains extra chirps heard during disarming related to previous alarms or bypasses.
Details the meaning of different siren chirp patterns during arming and disarming.
Lists zone numbers, their descriptions, and space for dealer-installed options.
Explains how LED blinks indicate active or triggered zones.
Explains the security feature that changes remote codes to prevent unauthorized access.
States the operating frequency (434 MHz) and its benefits for range and signal stability.
Describes the feature allowing personalized settings for different users via a programmer.
Explains how the system stores its state in non-volatile memory upon power loss and reconnection.
Details how the system enters power saver mode to reduce battery draw when armed or in override.
Explains the choice between remote-only active arming or automatic passive arming.
Allows enabling or disabling siren chirps for arming/disarming.
Explains automatic door locking/unlocking based on ignition status.
Describes door locking behavior during passive or active arming.
Option to enable or disable panic mode activation via ignition.
Ensures system arms even if entry points are left open.
Sets the duration of the triggered alarm sequence (30 or 60 seconds default).
Disables the starter after ignition off to prevent theft.
Allows customization of siren sounds and volume levels.
Sets the duration the engine can run during remote start (1-60 minutes).
Configures parking lights to flash or stay steady during remote start.
Detects glass breakage using acoustic signatures.
Provides power to the alarm if the vehicle battery is disconnected.
Prevents unauthorized hood opening.
Detects intrusions within a radar-generated field.
Controls vehicle power door locks.
Operates the vehicle's trunk or hatch release.
Controls power windows for up/down operation.
The central "brain" of the system, housing the microprocessor.
Prevents starter cranking when the system is armed.
A physical connection to the system from sensors or vehicle components.
A blue light indicating system status.
Detects impacts to the vehicle or glass.
A hand-held control for system functions.
The alarm's response to an event, including siren and light flashing.
A button used to override starter interrupt or enter/exit override mode.
Generates siren chirps and light flashes for lighter impacts.
A unique input recognized by the alarm system.
Instructions for arming the system.
Instructions for arming the system while the vehicle is in motion.
Instructions for disarming the system.
Instructions to silence the alarm without disarming.
Instructions for disarming without the remote.
Instructions for silent arming/disarming.
Instructions for activating panic mode.
Instructions for remote engine start.
Instructions to disable remote engine start.
Placeholder for override switch location.
Placeholder for number of pulses for disarming.
To Next Page
