Clarion K20 User Manual

NOTE: This product is intended for installation by a professional installer only!
Any attempt to install this product by any person other than a trained professional
may result in severe damage to a vehicle’s electrical system and components.
ProSecurity
Model K20
installation guide

Clarion K20 Specifications

General

Brand	Clarion
Model	K20
Category	Car Alarm
Language	English

Summary

Primary Harness (H1), 18-pin connector

Peripheral Plug-In Harnesses

Super Bright LED, 2-Pin WHITE Plug

Details the connection and function of the white 2-pin LED.

Valet/Program Switch, 2-Pin BLUE Plug

Explains the mounting and operation of the blue 2-pin Valet/Program switch.

System Features Learn Routine

System Features Menus

Lists and describes the system's configurable features and their settings.

Transmitter/Receiver Learn Routine

Transmitter Configurations

Outlines standard and single button programming for remote transmitters.

Rapid Resume Logic

Explains how the system retains its state after power loss.

Wiring Quick Reference Guide