12
Transmitter Configurations
The transmitters can be programmed with the standard or single button arm/disarm configurations by using the Auto Learn functions in the
Transmitter/Receiver Learn Routine.
Standard Configuration
A remote that uses the standard configuration operates similarly to many factory keyless entry remotes. A standard configuration transmitter
allows arming, disarming, and Panic Mode activation with separate buttons. When programmed for standard configuration using the Channel 1
Auto-learn configuration, the transmitter buttons are assigned to the following functions:
operates Arm only
operates Disarm only
operates Channel 2 and Audible
operates Panic only
and operate Channel 3
Rapid Resume Logic
Rapid Resume Logic ensures that the when the system is powered up it will return to the same state it was in when power is disconnected. For a
full description of Rapid Resume Logic refer to the owner's manual.
To Next Page
Loading...
Need help?
General
