To Next PageTo Next Page
Need help?Do you have a question about the Clarion UNGO ProSecurity S100 and is the answer not in the manual?
Details the primary harness wiring diagram and provides installation instructions for various wires.
Describes the connections and usage of the LED and Override switch for system interaction.
Explains the purpose and connection of the 3-pin BLACK programmer interface for unit configuration.
Provides steps and considerations for mounting the receiver/antenna for optimal signal range.
Details the 4-pin WHITE shock sensor harness, its inputs, and wiring for alarm triggers.
Explains the location and function of the programming jumper for setting system options.
Explains how the jumper controls the light flash output polarity and current for vehicle signals.
Describes how to temporarily bypass sensor inputs for specific operations like remote starting.
Lists features for basic configuration, including arming, locking, and siren settings.
Lists features for advanced configuration, such as siren duration and trigger options.
Provides in-depth explanations for features listed in Menu #1, covering their operation.
Provides in-depth explanations for features listed in Menu #2, covering their operation.
Outlines the steps to teach new remotes or change button assignments to the system.
Describes standard and single-button arm/disarm remote configurations and their functions.
Explains how siren chirps and zone status indicate system arming and disarming events.
Details how to access and interpret stored trigger information for security event history.
Addresses common problems like starter kill, sensor triggers, and door inputs not functioning.
General