15
2. Then press the Override switch once more and hold it.
For example, if you just programmed the third feature in the menu and you would like to program the
seventh feature in the menu, you would press and release the Override switch four times and then press
it once more and hold it. The siren would chirp seven times to confirm access to the seventh feature.
To select another menu:
1. Press and hold the Override switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating
which menu has been accessed.
For instance, if you just programmed some features in Menu #1 (Basic Features) and you wish to pro-
gram a feature in Menu #2, you press and hold the Override button. After three seconds, the siren
chirps twice indicating access to Menu #2.
To exit the learn routine do one of the following:
➤➤
Close the open door.
➤➤
Turn the ignition on.
➤➤
No activity for longer than 15 seconds.
➤➤
Press the Override switch too many times.
system features menus
menu #1 - basic features
Items in bold text have been programmed to the default setting at the factory.
Feature One Chirp Two-Chirp
Number Setting Setting
1-1 Active arming Passive arming
1-2 Chirps ON Chirps OFF
1-3 Ignition controlled door locks ON Ignition controlled door locks OFF
1-4 Active locking only Passive locking
1-5 Panic with ignition ON No panic with ignition ON
1-6 0.8 second door lock pulses 3.5 second door lock pulses
1-7 Forced passive arming ON Forced passive arming OFF
1-8 Automatic Engine Disable ON Automatic Engine Disable OFF
1-9 Armed When Driving Anti-Carjacking System
1-10 Anti-code grabbing ON Anti-code grabbing OFF
To Next Page
Loading...
Need help?
General
