10
individual recognition
Individual recognition is a feature available. Using the Pro Security
Programmer, a hand-held programming tool, your dealer can program
many of the system settings. The programmer makes it possible to pro-
gram different settings for each remote that is used with the system.
Then, whenever a specific remote is used, the system will recall the set-
tings assigned to that remote. Individual recognition lets up to four
users of the system have different settings that meet their specific
needs. It is almost like having four separate alarms in your vehicle, one
for each user.
power-up
This system will store its current state to non-volatile memory. If power
is lost and then reconnected, the system will recall the stored state from
memory. This means if the unit is in override mode and the battery is
disconnected for any reason, such as servicing the car, when the bat-
tery is reconnected the unit will still be in override mode. This applies
to all states of the system including arm, disarm, and panic mode.
nnoottee::
Individual recognition cannot be programmed without
a Pro Security Programmer and the necessary software.
Check with your dealer for more information.
To Next Page
Loading...