QUICK REFERENCE GUIDE
To lock/arm using your remote
➤ To arm the system press for one second. The doors will lock (if
connected). The LED will begin to flash. The Starter Kill will prevent the
vehicle’s starter from cranking if it has been installed. The vehicle’s horn (if
connected) will honk and the parking lights will flash once to confirm arming
of the system.
To unlock/disarm using your remote
➤ To disarm the system press for one second. The doors will unlock (if
connected). The Starter Kill will be deactivated and the vehicle’s horn (if con-
nected) will honk twice and the parking lights will flash twice.
Disabling the Starter Kill without a remote
➤ Turn on the ignition. Press and release the Override switch within 10 seconds.
The LED will stop flashing and the vehicle should start.
To enter or exit override mode
➤ Turn the ignition to the ON position. Turn the ignition back off. Press and
release the Override switch within 10 seconds. The status LED will light
steadily if you have entered override mode. To exit override mode, repeat the
steps above. The LED will turn off when exiting override mode.
To activate panic mode
➤ Press and hold for 2 seconds.
To exit panic mode
➤ Press on the remote.
Location of Override Switch________________________________
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
✂
To Next Page
Loading...